- Warning -
This tool does not guarantee your product production.
I (poser-ism Toshiyo) recommend the backup of a resource file.
Also, I (poser-ism Toshiyo) do not take responsibility at all, even if you suffer damage.


<poser particle Tools (page1)> This tool is the particle generate tool. Page1 is the main panel of this tool.

(1): position _category
The generate position (x, y, z) of particle is set up with spinner control.
The value of spinner is reset with "Right Click"
All spinner of XYZ is reset with a "R" button.

(2): space _category
The space where particle is generated with spinner of min and max is set up.
Also, the restriction of the axis that is generated with choice list is set up.
Choice list and spinner of min and max is reset with a "R" button.

(3): quantity _category
quantity (spinner control)
The quantity of particle is set up.
The value of spinner is reset with "Right Click".
birth step (spinner control)
Particle is the value of frame of birth step.
The value of spinner is reset with "Right Click".
All spinner of quantity and birth step is reset with a "R" button.
The PC power is necessary to set up many quantity.

(4): birth _category
birth (spinner control)
Birth frame of particle is set up.
The value of spinner is reset with "Right Click".
Spinner of min and max become enabled with the "birth"text right click.
Particle sets up birth (scale) with min and max.
Substituting hidden (birth or age) of pariticle with a scale command.
(Because the command that does hide animation to poser python is not found. Therefore, it has got seen the first particle with first frame.)


(5): age _category
age (spinner control)
Life frame of particle is set up.
The value of spinner is reset with "Right Click".
Spinner of min and max become enabled with the "age" text right click.
Particle sets up age (scale) with min and max.
Substituting hidden (birth or age) of pariticle with a scale command.
(Because the command that does hide animation to poser python is not found.)


(6): source object (radio button)
Object that makes particle is set up.
Actor (Not Figure. It is body parts in the case of Figure.) that "Select Item" is selected becomes paritcle.

(7): Template _category
(text control)
Input the name of new preset.
add (button)
New preset add to the list of preset.
set (button)
The preset that selected it is set up to the tool.
del (button)
Delete preset from a listing.
save (button)
Save the list of preset.
The preset is done overwrite.
load (button)
It does a preset file load (Load of comeback).
The presetting of the default value is done load with "Right Click". (Custom preset is deleted.)

(8): Utility _category
generateProp (button)
"generateProp" tool is loaded.
Please refer to Help of it about "generateProp" tool.
SetMat (button)
The same material as source object is applied to particle.
LookAt (button)
So that the direction of object where particle was selected is faced it sets up it.

(9): Apply _category
Remove (button)
In the case that particle is added, old particle is not eliminated. (Left Click)
However, all the particle are possible elimination with "Right Click", until the tool is closed.
ResetAll (button)
The parameter of page1 is reset.
The parameters of all the page are reset with "Right Click".
Apply (button)
Particle is generated.

The action of particle must set up it before be generated it.
Therefore, it assumed to make busy "Remove" button and "Apply" button.

(10): (gage)
When the generate of particle completes, the meter of gage becomes full.

(11): (button) _category
source Show (button)
Source object is displayed.
When usually, particle is generated it is hidden. (When "(6): Select Item" is selected exception.)
source Hide (button)
Source object is hidden.



<poser particle Tools (page2)> Page2 sets up the action of individual particle.

It sets up it before particle generate.

(1): xtran, ytran, etc. (check box)
It is the check box of transform parameter of individual particle. There are translation, rotation, scale.
It becomes enabled with a check.

(2): 0 over (check box)
The position of particle avoids becoming 0 or less.

(3): 1 turn (check box)
Particle does only 1 turn.

(4): half (check box)
The size of particle avoids becoming half or less.

(5): spead (spinner control)
Particle sets up the direction and speed that do transform. (Plus direction and minus direction)
For example, spead of ytran is -15 in the case of, Particle goes ahead in the direction of under (minus direction) with 15 of speed.

(6): Fluctuation (spinner control)
The fluctuation of transform of particle is set up.
The random value is decided in the numerical value of "spead" and "Fluctuation".

(7): R (button)
The value of the spinner etc. of an individual parameter is reset.

(8): ON ALL (button)
It does all the check boxes ((1)) enable.

(9): ON ALL (button)
It does all the check boxes ((1)) unenable.

(10): Reset ALL (button)
The parameter of page2 is reset.



<poser particle Tools (page3)> Page3 sets up the action of parent object.

It sets up it before particle generate.
By operating parent object the general action of particle is able to be set up.

(1): xtran, ytran, etc. (check box)
It is the check box of transform parameter of parent object. There are translation, rotation, scale.
It becomes enabled with a check.

(2): spead (spinner control)
Parent object sets up the direction and speed that do transform. (Plus direction and minus direction)

(3): Auto/spead (spinner control)
If spinner is 0 in the case of rotation, the rotation value is set up automatic.
If spinner is not 0 it changes to usual (not automatic) setting.

(4): Fluctuation (spinner control)
The fluctuation of transform of parent object is set up.
The random value is decided in the numerical value of "spead" and "Fluctuation".

(5): R (button)
The value of the spinner etc. of an individual parameter is reset.

(6): ON ALL (button)
It does all the check boxes ((1)) enable.

(7): ON ALL (button)
It does all the check boxes ((1)) unenable.

(8): Reset ALL (button)
The parameter of page3 is reset.



<poser particle Tools (page4)> Page4 operates parent object directly.

After particle is generated, able to operate parent object directly.

(1): select source (button)
Source object is selected.

(2): R (button)
All parameters of this page is reset.

(3): select parent (button)
Parent object is selected.

(4): Show/visible (button)
It displays, or hide parent object.

(5): xtran, ytran, etc. _category
(spinner control)
Transform of parent object is set up.
Parent object is selected automatically.

(6): R (button)
An individual parameter is reset.



<poser particle Tools (page5)> Page5 operates individual particle directly.

After particle is generated, able to operate individual particle directly.

(1): xtran, ytran, etc. _category
(spinner control)
Transform of individual particle is set up.
Particle is selected automatically.

(2): R (button)
An individual parameter is reset.

(3): scale (slider control)
As for this parameter the change of the size is extreme. (It is because it is related to the birth etc. of particle.)

(4): xyz lock (slider control)
Xscale slider, yscale slider, zscale slider are adjusted simultaneously. The adjustment of the result, even size are possible.
However, the reaction of the tool becomes late.

(5): Reset All (button)
All parameters of this page is reset.



This example makes Figure particle.
Please set up the length of proper frame. (For example, Animation frame 300, camera animation off)

First of all, it makes Figure Prop with "generateProp" tool. CloneObj becomes source object.
"Select Item" radio button is selected. Even proper presetting sets it.
Selecting cloneObj and push "Apply" button.



Particle was generated.
However, the material is a random.


When you push "Set Mat" button the material of source object is copied to particle.